SD-03 Product Data
Materials
Manufacturer's catalog cuts, descriptive data, and installation
instructions.
SD-04 Samples
Lead-Lined Wood Panels
200 x 250 mm 8 x 10 inch sample of each specified panel.
SD-06 Test Reports
Testing and Certification
Copies of surveyor's reports.
SD-07 Certificates
Materials
Certification indicating the shielding materials supplied comply
with specified quality and thicknesses.
1.4
QUALIFICATIONS
Work shall be performed by a company which specializes in the type of
shielding work required by the Contract documents. Company shall have a
minimum of [5] [_____] years of documented successful experience.
1.5
DELIVERY, STORAGE AND HANDLING
Materials shall be delivered in the original containers bearing the name of
the manufacturer and brand name. Shielding materials shall be stored off
the ground under watertight cover. Handle materials preventing damage to
edges, ends or surfaces in conformance with 29 CFR 1910.1025. Damaged
materials shall be removed from the premises. [Leave protective paper on
acrylic panels until installation is complete.]
1.6
WARRANTY
Lead sheet shielding materials shall be warranted against sagging and
curling for [10] [_____] years.
PART 2
PRODUCTS
2.1
LEAD SHEET
Lead sheet shall conform to ASTM B 749, Grade C, thickness as shown.
2.2
LEAD-LINED CONCRETE MASONRY UNITS
**************************************************************************
NOTE: Coordinate the requirements of this Section
with Section 04200 MASONRY. Lead-lined masonry
units have a broad range of lead thicknesses.
SECTION 13090
Page 7
Previous Page
