(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-04 Samples
Drapery fabric; G
Submit a range of three samples, 900 by 900 mm 36 by 36 inches
or larger, to match the fabric quality, weight, pattern, and color
shown or specified. Once selected, label approved samples to
identify locations for their use in the project. Maintain
identification and approval markings until final acceptance of the
work.
**************************************************************************
NOTE: Coordinate with the drapery hardware
specified for the project. Should the designer
choose to indicate the location for the sample
window installation, clearly indicate the location
on the project drawings and edit the paragraph
accordingly.
**************************************************************************
Finished drapery
Provide one full size window sample installation including
hardware. Install the finished drapery on a [stationary]
[traverse] [rod] [or] [track] [at the location indicated].
SD-06 Test Reports
Flame resistance
SD-08 Manufacturer's Instructions
Drapery hardware
Special fabrication
Before fabrication, submit the manufacturer's printed
instructions for fabrics requiring special fabrication methods.
SD-10 Operation and Maintenance Data
SECTION 12491N
Page 5
Previous Page
