specified herein.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z124.3
(1995) Plastic Lavatories
ASTM INTERNATIONAL (ASTM)
ASTM D 2583
(1995; R 2001e1) Indentation Hardness of
Rigid Plastics by Means of a Barcol
Impressor
ASTM D 570
(1998) Water Absorption of Plastics
ASTM D 638
(2003) Tensile Properties of Plastics
ASTM E 84
(2004) Surface Burning Characteristics of
Building Materials
BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)
BHMA A156.9
(2003) Cabinet Hardware
KITCHEN CABINET MANUFACTURERS ASSOCIATION (KCMA)
KCMA A161.1
(2000) Performance & Construction
Standards for Kitchen and Vanity Cabinets
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA LD 3
(2000) High-Pressure Decorative Laminates
1.2
DESIGN
Cabinets shall be wood, factory-fabricated and finished in the
manufacturer's standard sizes and finishes of the type, design, and
configuration indicated. Cabinets shall be constructed as specified and
shall meet the requirements of KCMA A161.1. Wall and base cabinet
assemblies shall consist of individual units joined into continuous
sections. Fastenings shall be accomplished to permit removal and
replacement of individual units without affecting the remainder of the
installation. Counters shall be provided with watertight sink rim when
indicated. Drawers shall be removable and shall be equipped with position
SECTION 12320A
Page 3
Previous Page
