coordinated and will properly function as a unit. Drawings shall
show proposed layout and anchorage of equipment and appurtenances,
and equipment relationship to other parts of the work including
clearances for maintenance and operation.
SD-03 Product Data
Materials and Equipment
A complete list of equipment and material, including
manufacturer's descriptive data and technical literature,
performance charts and curves, catalog cuts, and installation
instructions.
Spare Parts
Spare parts data for each different item of material and
equipment specified.
Framed Instructions
A copy of the instructions proposed to be framed and posted.
SD-06 Test Reports
Testing
Performance test reports in booklet form showing all field tests
performed to adjust each component and all field tests performed
to prove compliance with the specified performance criteria, upon
completion and testing of the installed system. Each test report
shall indicate the final position of controls. Boiler and heat
exchanger test reports shall include manometer readings at the
main gas regulator, pilot gas regulator, burner inlet, burner and
the furnace; amperes drawn by all motors; voltage of main flame
and pilot controller signal; and flue gas readings including
percent oxygen, percent carbon dioxide, temperature, efficiency,
and smoke test results.
SD-10 Operation and Maintenance Data
Operating and Maintenance Manuals[; G][; G, [_____]]
[Six] [_____] copies of operation and [six] [_____] copies of
maintenance manuals for the equipment furnished. One complete
set, prior to performance testing and the remainder upon
acceptance. Operation manuals shall detail the step-by-step
procedures required for system startup, operation, and shutdown.
Operation manuals shall include the manufacturer's name, model
number, parts list, and brief description of all equipment and
their basic operating features. Maintenance manuals shall list
routine maintenance procedures, possible breakdowns and repairs,
and troubleshooting guides. Maintenance manuals shall include
piping and equipment layout and simplified wiring and control
diagrams of the system as installed. Manuals shall be approved
prior to the field training course.
SECTION 11380
Page 8
Previous Page
