**************************************************************************
NOTE: On small jobs, e.g. replacement of one dock
leveler, not all submitted requirements are
necessary and must be edited to fit each job.
**************************************************************************
Loading Dock Levelers[; G][; G, [_____]]
Dock Bumpers[; G][; G, [_____]]
Restraining Device[; G][; G, [_____]]
Data including a complete list of equipment and materials,
manufacturer's descriptive and technical literature, performance
charts and curves, catalog cuts, and installation instructions.
SD-10 Operation and Maintenance Data
Operating and Maintenance Instructions[; G][; G, [_____]]
[Six] [_____] copies of operation and [six] [_____] copies of
maintenance manuals for the equipment furnished. One complete set
shall be furnished prior to performance testing and the remainder
shall be furnished upon acceptance. Operating manuals shall
detail the step-by-step procedures required for system startup,
operation, and shutdown. Operating manuals shall include the
manufacturer's name, model number, parts list, and brief
description of all equipment and their basic operating features.
Maintenance manuals shall list routine maintenance procedures,
possible breakdowns and repairs, and troubleshooting guides.
Maintenance manuals shall include piping and equipment layout and
simplified wiring and control diagrams of the system as installed.
After approval of the detail drawings, and not later than [_____]
months prior to the date of beneficial occupancy, spare parts data
for each different item of material and equipment specified are
required. The data shall include a complete list of parts and
supplies, with current unit prices and source of supply and a list
of the parts recommended by the manufacturer to be replaced after
[1] [and] [3] year(s) of service.
Loading Dock Levelers[; G][; G, [_____]]
Restraining Device[; G][; G, [_____]]
Submit Data Package 3 for Dock Leveler and Data Package 2 for
Restraining Device in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA.
1.4
GENERAL REQUIREMENTS
Materials and equipment shall be the standard products of a manufacturer
regularly engaged in the manufacture of the products and shall essentially
duplicate items that have been in satisfactory use for at least 2 years
prior to bid opening. Equipment shall be supported by a service
organization that is, in the opinion of the Contracting Officer, reasonably
convenient to the site. Section 15050N BASIC MECHANICAL MATERIALS AND
METHODS, applies to this Section, with the additions and modifications
specified herein.
SECTION 11161
Page 6
Previous Page
