and color is used, be certain that the product
conforms to this specification, as edited.
**************************************************************************
Color shall be [in accordance with Section 09915 COLOR SCHEDULE.] [as
indicated on the drawings.] [selected from manufacturers standard colors.]
[[______.] Color listed is not intended to limit the selection of equal
colors from other manufacturers.] For buildings required to be
handicapped-accessible, the characters and background of signs shall be
eggshell, matte, or other non-glare finish. Characters and symbols shall
contrast with their background - either light characters on a dark
background or dark characters on a light background.
PART 3
EXECUTION
3.1
INSTALLATION
Signs, plaques, or dimensional letters shall be installed in accordance
with approved manufacturer's instructions at locations shown on the
approved detail drawings. Circuits installed underground shall conform to
the requirements of Section 16375A ELECTRICAL DISTRIBUTION SYSTEM,
UNDERGROUND. Steel conduits installed underground and illuminated signage
mounted directly on buildings shall be in conformance with the requirements
of Section 16402 INTERIOR DISTRIBUTION SYSTEM. Signs shall be installed
plumb and true at mounting heights indicated, and by method shown or
specified. Signs mounted on other surfaces shall not be installed until
finishes on such surfaces have been completed.
3.1.1
Anchorage
Anchorage and fastener materials shall be in accordance with approved
manufacturer's instructions for the indicated substrate. Anchorage not
otherwise specified or indicated shall include slotted inserts, expansion
shields, and powder-driven fasteners when approved for concrete; toggle
bolts and through bolts for masonry; machine carriage bolts for steel; lag
bolts and screws for wood.
3.1.2
Protection and Cleaning
The work shall be protected against damage during construction. Hardware
and electrical equipment shall be adjusted for proper operation. Glass,
frames, and other sign surfaces shall be cleaned in accordance with
manufacturer's instructions. After signs are completed and inspected, the
Contractor shall cover all project identification, directional, and other
signs which may mislead the public. Covering shall be maintained until
instructed to be removed by the Contracting Officer or until the facility
is to be opened for business. Signs shall be cleaned, as required, at time
of cover removal.
3.2
FIELD PAINTED FINISH
Miscellaneous metals and frames shall be field painted in accordance with
Section 09900 PAINTS AND COATINGS. Anodized metals, masonry, and glass
shall be protected from paint. Finish shall be free of scratches or other
blemishes.
-- End of Section --
SECTION 10430
Page 18
Previous Page
