**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-10260 (October 2003)
----------------------------
Preparing Activity: USACE
Superseding
UFGS-10260 (July 2002)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 10260
WALL AND CORNER GUARDS
10/03
**************************************************************************
NOTE: This guide specification covers the
requirements for corner guards, wall guards (bumper
guards), door protectors, and wall panels.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
Drawings should show basic profiles and details but
should not be so explicit as to become proprietary
in nature. The following information shall be shown
on the project drawings:
1.
Locations of wall and corner guards.
2. Locations of handrails, wall panels, and door
3. Mounting and anchorage details, and dimensions.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: Army facilities not excluded by TI 800-01
Design Criteria will be accessible in accordance
with 36 CFR, Part 1191, Americans with Disabilities
SECTION 10260
Page 3
Previous Page
