applied to a minimum dry film thickness of 0.025 mm 1.0 mil.
Provide piping with 50 mm 2 inch wide red enamel bands or
self-adhering red plastic bands spaced at maximum of 6 meters 20
][1.10.4
Exterior Painting of Site Work Items
Field coat the following items:
New Surfaces
Existing Surfaces
a.
[_____]
[_____]
b.
[_____]
[_____]
c.
[_____]
[_____]
]1.10.5
MISCELLANEOUS PAINTING
Lettering shall be provided as scheduled on the drawings, shall be [block]
[Gothic] type, and shall be [black enamel] [water-type decalcomania,
finished with a protective coating of spar varnish]. Samples shall be
approved before application.
[Obstructions To Aviation
**************************************************************************
NOTE: Structures, such as smokestacks, poles, and
buildings, which have been identified as obstruction
to aviation will be specified by name. Verify that
the structures so identified are not specified to be
painted in the sections specifying the structures so
that painting will not be specified twice.
Coordinate with FAA for alternate colors and
patterns.
**************************************************************************
The following obstructions to aviation shall be painted in the pattern and
color prescribed by [FAA AC 70/7460-1] [_____]]
1.10.6
Definitions and Abbreviations
1.10.6.1
Qualification Testing
Qualification testing is the performance of all test requirements listed in
the product specification. This testing is accomplished by MPI to qualify
each product for the MPI Approved Product List, and may also be
accomplished by Contractor's third party testing lab if an alternative to
Batch Quality Conformance Testing by MPI is desired.
1.10.6.2
Batch Quality Conformance Testing
Batch quality conformance testing determines that the product provided is
the same as the product qualified to the appropriate product specification.
This testing shall only be accomplished by MPI testing lab.
SECTION 09900
Page 22