**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)
ACGIH 0100Doc
(2001) Documentation of the Threshold
Limit Values and Biological Exposure
Indices
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI A13.1
(1996; R 2002) Scheme for Identification
of Piping Systems
ASTM INTERNATIONAL (ASTM)
ASTM C 669
(2000) Glazing Compounds for Back Bedding
and Face Glazing of Metal Sash
ASTM C 920
(2002) Elastomeric Joint Sealants
ASTM D 2092
(1995; R 2001e1) Preparation of
Zinc-Coated (Galvanized) Steel Surfaces
for Painting
ASTM D 235
(2002) Mineral Spirits (Petroleum Spirits)
(Hydrocarbon Dry Cleaning Solvent)
ASTM D 2824
(2004) Aluminum-Pigmented Asphalt Roof
Coatings, Non-Fibered, Asbestos Fibered,
and Fibered without Asbestos
ASTM D 4214
(1998) Evaluating the Degree of Chalking
of Exterior Paint Films
ASTM D 4263
(1983; R 1999) Indicating Moisture in
Concrete by the Plastic Sheet Method
ASTM D 4444
(1992; R 2003) Use and Calibration of
Hand-Held Moisture Meters
ASTM D 523
(1989; R 1999) Specular Gloss
SECTION 09900
Page 6
Previous Page
