This guide specification DOES NOT address
high-performance or specialty coating requirements,
or protective coating of industrial structures or
facilities, including but not limited to:
1.
Towers;
2.
Pilings;
3.
Pavement markings;
4. Items requiring specialized treatment due to
peculiar usage;
5.
Petroleum storage facilities;
6.
Water storage facilities;
7. Waterfront facilities, except shore-to-ship
utility connections; and
8.
Hangars
If such items are in the project they should be
included in a separate section or this section
should be modified accordingly. The following guide
specifications are examples of those available for
specific service conditions noted, and may be
modified to provide for related service conditions:
1. Section 09965 METALLIC TYPE CONDUCTIVE/SPARK
RESISTANT CONCRETE FLOOR FINISH. This specification
covers the painting of hydraulic structures located
in fresh water such as locks and dams.
2. Section 09970 INTERIOR COATING OF WELDED STEEL
PETROLEUM FUEL TANKS
3. Section 09971 EXTERIOR COATING OF STEEL
STRUCTURES. This specification is usable for any
steel structure exposed to weather, and is usable
for other purposes as well, such as hangar
structures, enclosed swimming pool structures, and
most situations requiring high-performance
protective coating systems.
4. Section 09972 INTERIOR COATING OF WELDED STEEL
WATER TANKS
5. Section 09973 INTERIOR COATING OF WELDED STEEL
PETROLEUM FUEL TANKS. This is a three-coat epoxy
system that is adaptable to a wide range of
high-performance protective coating requirements
where there is no exposure to sunlight.
This guide generally contains only two types of
coating systems, solvent based and water based. If
different systems are required regionally, or for
special needs, modify the guide accordingly.
SECTION 09900
Page 5
Previous Page
