flooring manufacturer; when applied to the resin topping and dry, it shall
be nonslip and resistant to staining. Resin shall be suitable for the type
application indicated.
2.5
ANTIMICROBIAL
**************************************************************************
NOTE: Include the requirement for this item only on
projects where this additional feature is needed.
**************************************************************************
Industrial resin-based flooring shall be treated to be resistant to fungi
and bacteria.
2.6
WALL BASE
2.6.1
Resilient Base
Base shall be [Type I (rubber)] [or] [Type II (vinyl)] Style B, (coved).
Base shall be [100] [150] mm [4] [6] inches high and a minimum 3 mm 1/8 inch
thick. [Preformed outside] [Job formed] corners shall be furnished.
2.6.2
Self-Coving
**************************************************************************
NOTE: Self-coving will be used when highest
standard of cleanliness is required.
**************************************************************************
Self-coving shall consist of industrial resin-based flooring coved up at
the base as shown. Coved base shall be the same thickness as the flooring.
2.7
COLOR
Color shall be [in accordance with Section 09915 COLOR SCHEDULE] [_____].
PART 3
EXECUTION
3.1
SURFACE PREPARATION
**************************************************************************
NOTE: Resinous floor systems should not be
installed over existing resilient tile or sheet
flooring. If existing concrete substrates are badly
cracked, crumbling, punky, or deeply contaminated
with oil or fat, a new concrete topping of proper
thickness and strength should be shown and
specified. Wood floors that are poorly supported,
badly worn, splinter, grease or oil soaked should be
renovated prior to application of resinous flooring.
**************************************************************************
[Completely remove existing resilient flooring and adhesive by scraping.]
[Remove all dirt, dust, debris, and other loose particles by sweeping or
vacuum cleaning.]
3.1.1
Concrete Surfaces
**************************************************************************
SECTION 09670
Page 14
Previous Page
