**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-09670 (November 2003)
--------------------------
Preparing Activity: USACE
Superseding
UFGS-09670 (August 2002)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 09670
FLUID-APPLIED FLOORING
11/03
**************************************************************************
NOTE: This guide specification covers the
requirements for trowelled-on industrial resinous
flooring, conductive resinous flooring, and
decorative resinous flooring except resinous terrazzo.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
On the drawings, show:
1. Location of resinous flooring. If more than one
type is to be used, key each to location on the
drawings.
2. Details of special items such as coved bases,
expansion joints, control joints, stairs, and floor
drains.
3. Details for grounding of conductive floors.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: The floor systems covered by this guide
specification are primarily intended for use in
SECTION 09670
Page 3
Previous Page
