the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-03 Product Data
Conductive Vinyl Tile
Manufacturer's data composed of catalog cuts, brochures and
product information.
Installation of Conductive Vinyl Tile
Manufacturer's preprinted material describing product
installation. Cleaning and maintenance instructions shall be
included.
SD-04 Samples
Conductive Vinyl Tile
Three samples of each color and type of flooring and base.
Sample size shall be minimum 75 x 75 mm 3 x 3 inch.
SD-06 Test Reports
Testing
Reports of tests, including analysis and interpretation of test
results. Each report shall be properly identified. The test
methods used shall be identified and the test results shall be
recorded.
SD-07 Certificates
Conductive Vinyl Tile
Adhesive
Qualification of Applicator
Certificate attesting that the tile and adhesive meet the
requirements specified. Certificate indicating approval of the
flooring applicator by the flooring manufacturer.
1.3
QUALIFICATION OF APPLICATOR
Applicator shall be approved by the flooring manufacturer and shall have a
minimum of 3 years experience in the application of the materials to be
used.
1.4
DELIVERY AND STORAGE
Materials shall be delivered to the building site in original unopened
containers. Materials shall be stored in a clean dry area with temperature
maintained above 21 degrees C 70 degrees F for two days prior to
installation.
1.5
ENVIRONMENTAL REQUIREMENTS
Areas to receive conductive vinyl flooring shall be maintained at a
temperature above 21 degrees C 70 degrees F for two days before, during,
SECTION 09660
Page 4
Previous Page
