Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Installation[; G][; G, [_____]]
Drawings indicating the type, size, and layout of divider strips
and control joint strips and color of floor areas.
SD-04 Samples
Terrazzo Flooring
Divider Strips
Control Joint Strips
Colorants
Two 150 x 150 mm 6 x 6 inch (minimum) samples of each color of
terrazzo and two 150 mm 6 inch lengths of each type divider and
control joint strip.
SD-10 Operation and Maintenance Data
Cleaning and Sealing
Maintenance instructions for bonded terrazzo.
1.3
DELIVERY AND STORAGE
Materials shall be delivered in the manufacturer's unopened containers
marked with the brand name. Materials shall be delivered, handled, and
stored in accordance with manufacturers instructions in a manner that will
SECTION 09410
Page 5
Previous Page
