Areas to receive terrazzo will be shown on the
drawings. Color should be indicated by showing a
selected plate number from the NTMA publication,
"Terrazzo Design/Technical Data"
Example: NTMA Terrazzo Color Palette, plate No.
S-301-4. Colors selected may be any combination of
standard marble granules of domestic origin
available in the local market.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 150
(2004a) Portland Cement
ASTM C 171
(2003) Sheet Materials for Curing Concrete
ASTM C 241
(1990; R 1997e1) Abrasion Resistance of
Stone Subjected to Foot Traffic
ASTM C 309
(2003) Liquid Membrane-Forming Compounds
for Curing Concrete
ASTM C 33
(2003) Concrete Aggregates
NATIONAL TERRAZZO & MOSAIC ASSOCIATION (NTMA)
NTMA Info Guide
(2000) Terrazzo Information Guide
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
SECTION 09410
Page 4
Previous Page
