The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM A 185
(2002) Steel Welded Wire Reinforcement,
Plain, for Concrete
ASTM C 1032
(2004) Woven Wire Plaster Base
ASTM C 1063
(2003) Installation of Lathing and Furring
to Receive Interior and Exterior Portland
Cement-Based Plaster
ASTM C 150
(2004a) Portland Cement
ASTM C 206
(2003) Finishing Hydrated Lime
ASTM C 841
(2003) Installation of Interior Lathing
and Furring
ASTM C 847
(1995; R 2000) Metal Lath
ASTM C 897
(2000) Aggregate for Job-Mixed Portland
Cement-Based Plasters
ASTM C 926
(1998a) Application of Portland
Cement-Based Plaster
ASTM C 933
(2004) Welded Wire Lath
ASTM D 1784
(2003) Rigid Poly(Vinyl Chloride) (PVC)
Compounds and Chlorinated Poly(Vinyl
Chloride) (CPVC) Compounds
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
SECTION 09225
Page 4
Previous Page
