lathing (Section 09205N FURRING AND LATHING or
09200A LATHING AND PLASTERING) must be designed and
detailed to provide an unrestrained system. Also
design and detail sleeve and caulking for fire
sprinkler, electrical, and mechanical penetrations
to avoid transferring structural or vibrational
loads from these systems to the plaster panels.
**************************************************************************
**************************************************************************
NOTE: For terminology on gypsum plaster, refer to
latest edition of Portland Cement Plaster (Stucco)
Manual by Portland Cement Association and ASTM C 11
Standard Terminology Relating to Gypsum and Relating
Building Materials and Systems.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 206
(2003) Finishing Hydrated Lime
ASTM C 28/C 28M
(2000el) Gypsum Plasters
ASTM C 35
(2001) Inorganic Aggregates for Use in
Gypsum Plaster
ASTM C 472
(1999; R 2004) Physical Testing of Gypsum,
Gypsum Plasters and Gypsum Concrete
ASTM C 59/C 59M
(2000) Gypsum Casting Plaster and Gypsum
Molding Plaster
ASTM C 61/C 61M
(2000) Gypsum Keene's Cement
ASTM C 631
(1995a; R 2004) Bonding Compounds for
Interior Gypsum Plastering
ASTM C 842
(1999) Application of Interior Gypsum
Plaster
ASTM E 1042
(2002) Acoustically Absorptive Materials
Applied by Trowel or Spray
SECTION 09210
Page 4
Previous Page
