AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z97.1
(1984; R 1994) Safety Glazing Materials
Used in Buildings
ASTM INTERNATIONAL (ASTM)
ASTM C 1036
(2001) Flat Glass
ASTM C 1048
(2004) Heat-Treated Flat Glass - Kind HS,
Kind FT Coated and Uncoated Glass
ASTM D 1044
(1999) Resistance of Transparent Plastics
to Surface Abrasion
ASTM D 3330/D 3330M
(2004) Peel Adhesion of Pressure-Sensitive
Tape
ASTM D 882
(2002) Tensile Properties of Thin Plastic
Sheeting
ASTM E 84
(2004) Surface Burning Characteristics of
Building Materials
GLASS ASSOCIATION OF NORTH AMERICA (GANA)
GANA Glazing Manual
(2004) Glazing Manual
GANA Sealant Manual
(1990) Sealant Manual
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
16 CFR 1201
Safety Standard for Architectural Glazing
Materials
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
SECTION 08850
Page 3
Previous Page
