hardware to appropriate locking control panel.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C37.90.1
(2002) Surge Withstand Capability (SWC)
Tests for Relays and Relay Systems
Associated with Electric Power Apparatus
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 1
(2000) Industrial Control and Systems:
General Requirements
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
1.2
SYSTEM DESCRIPTION
1.2.1
System Components
The locking control systems shall be configured from locking control
panels, logic units, relay terminal equipment, and wiring.
a.
Locking control panels: Locking control panels shall provide
mounting for various control switches, audible annunciators, and
visual annunciators which shall provide control and annunciation
interface between the staff and the locking control system.
b.
Logic units: The logic units shall provide logic transactions
necessary to implement the functional operation of the locking
control system.
c.
Relay terminal equipment: Provide relay terminal equipment, with
terminal facilities for field wiring and relay equipment for the
conversion of low energy system control to high energy control
signals, as necessary to control and operate devices as specified
in this section.
SECTION 08745
Page 4
Previous Page
