Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Windows; G, [_____]
Indicate elevations of windows, full-size sections, thicknesses
of PVC, reinforcing members, fastenings, proposed method of
anchoring, size and spacing of anchors, details of construction,
method of glazing, details of operating hardware, [mullion
details,] [method and materials for weatherstripping,] [method of
attaching screens,] [material and method of attaching subframes,]
[fins,] [stools,] [casings,] [sills,] [trim,] [window cleaner
anchors,] accessories, installation details, window flashings and
other related items.
Schedule of windows; G, [_____]
Submit with drawings indicating location of each window unit.
SD-03 Product Data
Windows; G, [_____]
Hardware
Fasteners
Screens
Weatherstripping
Accessories
SD-04 Samples
Windows; G, [_____]
Submit one full-size window of each type, complete with
certification label indicating conformance to AAMA 101 or ASTM D
4099, glazing, hardware, [fins,] anchors, and other accessories.
[Where screens or weatherstripping are required, fit sample
windows with such items that are to be provided.] After approval,
install each sample in the work, clearly identified, and record
its location.
SD-06 Test Reports
Windows; G, [_____]
Submit for each window type attesting that identical or larger
windows have been tested and meet the requirements specified
herein for conformance to AAMA 101 or ASTM D 4099 and the
SECTION 08560
Page 6
Previous Page
