is contemplated that this work will be done after
erection of windows by the trade for the item to be
installed. On projects where factory drilling for
these items is required, revise this specification
accordingly.
6. Brackets and supports for window shades, drapery
rods, and venetian blinds.
**************************************************************************
**************************************************************************
NOTE: On the drawings, show:
1. Sizes and types of windows; subframes, casings,
stools, and hardware.
2. Sizes, location, and swing of ventilators;
direction of slide for sliding ventilators; location
and details of fixed sash.
3. Typical window sections and details. Show glass
thickness and air spaces of insulating glass. Show
special glazing, if any.
4. Method of anchoring windows to adjoining
construction; size and types of clips, anchors,
screws, and other fasteners.
5. Details of nonstructural mullions and mullion
covers; details of anchoring and reinforcing
nonstructural mullions at windows to receive window
cleaner anchors. Details of transom bars.
6. Number of window cleaner anchors required and
locations.
7. Types and details of accessories to be
furnished, such as, trim, screens, grills, and
integral venetian blinds.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
SECTION 08560
Page 4
Previous Page
