ASTM E 547
(2000) Water Penetration of Exterior
Windows, Skylights, Doors, and Curtain
Walls by Cyclic Static Air Pressure
Difference
ASTM E 90
(2004) Laboratory Measurement of Airborne
Sound Transmission Loss of Building
Partitions and Elements
INSECT SCREENING WEAVERS ASSOCIATION (ISWA)
ISWA IWS 089
(1990) Recommended Standards and
Specifications for Insect Wire Screening
(Wire Fabric)
NATIONAL FENESTRATION RATING COUNCIL (NFRC)
NFRC 100
(2004) Procedure for Determining
Fenestration Product U-Factors
NFRC 200
(2004) Procedure for Determining
Fenestration Product Solar Heat Gain
Coefficient and Visible Transmittance
at
Normal Incidence
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 101
(2003) Life Safety Code
SCREEN MANUFACTURERS ASSOCIATION (SMA)
SMA 1004
(1987; R 1998) Aluminum Tubular Frame
Screens for Windows
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
SECTION 08520A
Page 5
Previous Page
