SECTION 08342 STEEL SLIDING HANGAR DOORS

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-08342 (August 2002)

------------------------------

Preparing Activity: NAVFAC

Superseding

UFGS-08342 (March 2001)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

Latest change indicated by CHG tags

**************************************************************************

SECTION 08342

STEEL SLIDING HANGAR DOORS

08/02

**************************************************************************

NOTE: This guide specification covers the

requirements for steel sliding hangar doors, their

operators, and controls.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: Steel rails, top guides, hanging head

flashing, field painting, and electrical work for

hangar doors are specified in other sections.

**************************************************************************

NOTE: On the drawings, show:

1. Size and arrangement of doors. Electrical and

structural provisions for motor operators.

2. Location and type of weather stripping, exterior

covering, interior lining, and flashing.

3. Location, spacing, size, and type of top guides

and rails. Center-to-center dimension of leaves not

less than 350 mm 14 inches, and not less than 115 mm

4 1/2 inches greater than total thickness of each

SECTION 08342

Page 3