PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ARCHITECTURAL WOODWORK INSTITUTE (AWI)
AWI Qual Stds
(2003) AWI Quality Standards
ASTM INTERNATIONAL (ASTM)
ASTM E 152
(1981ae2) Fire Tests of Door Assemblies
ASTM E 283
(2004) Determining the Rate of Air Leakage
Through Exterior Windows, Curtain Walls,
and Doors Under Specified Pressure
Differences Across the Specimen
ASTM E 90
(2004) Laboratory Measurement of Airborne
Sound Transmission Loss of Building
Partitions and Elements
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA LD 3
(2000) High-Pressure Decorative Laminates
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 252
(2003) Fire Tests of Door Assemblies
NFPA 80
(1999) Fire Doors and Fire Windows
UNDERWRITERS LABORATORIES (UL)
UL 10B
(1997; Rev thru Oct 2001) Fire Tests of
Door Assemblies
WINDOW AND DOOR MANUFACTURERS ASSOCIATION (WDMA)
WDMA I.S. 1-A
(1997) Architectural Wood Flush Doors
WDMA I.S. 4
(2000) Water-Repellent Preservative
Non-Pressure Treatment for Millwork
WDMA I.S. 6
(1997) Wood Stile and Rail Doors
WDMA TM-5
(1990) Split Resistance Test Method
SECTION 08210
Page 4
Previous Page
