PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ALUMINUM ASSOCIATION (AA)
AA DAF-45
(2003) Designation System for Aluminum
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
AAMA 101
(2002) Voluntary Specifications for
Aluminum, Vinyl (PVC) and Wood Windows and
Glass Doors
AAMA 1503
(1998) Voluntary Test Method for Thermal
Transmittance and Condensation Resistance
of Windows, Doors and Glazed Wall Sections
AAMA 800
(1992) Voluntary Specifications and Test
Methods for Sealants
ASTM INTERNATIONAL (ASTM)
ASTM C 1048
(2004) Heat-Treated Flat Glass - Kind HS,
Kind FT Coated and Uncoated Glass
ASTM D 3656
(2004) Insect Screening and Louver Cloth
Woven from Vinyl-Coated Glass Yarns
ASTM E 437
(1992; R 1997) Industrial Wire Cloth and
Screens (Square Opening Series)
ASTM F 842
(2004) Measuring the Forced Entry
Resistance of Sliding Door Assemblies,
Excluding Glazing Impact
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
16 CFR 1201
Safety Standard for Architectural Glazing
Materials
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
SECTION 08161
Page 3
Previous Page
