thoroughly. Apply an all-over coat of rust-inhibitive paint of the same
type used for shop coat.
3.3
CLEANING
Upon completion, clean exposed surfaces of doors and frames thoroughly.
Remove mastic smears and other unsightly marks.
3.4
SCHEDULE
Some metric measurements in this section are based on mathematical
conversion of inch-pound measurements, and not on metric measurement
commonly agreed to by the manufacturers or other parties. The inch-pound
and metric measurements are as follows:
PRODUCTS
INCH-POUND
METRIC
Door thickness
1 3/4 inches
44.5 mm
Steel channels
16 gage
1.5 mm
Steel Sheet
23
gage
0.7
mm
16
gage
1.5
mm
20
gage
0.9
mm
18
gage
1.2
mm
Anchor bolts
3/8 inches
10 mm
-- End of Section --
SECTION 08110
Page 17
Previous Page
