3.4.2
Final Cleaning
Upon completion of sealant application, remove remaining smears and stains
and leave the work in a clean and neat condition.
a.
Masonry and Other Porous Surfaces: Immediately scrape off fresh
sealant that has been smeared on masonry and rub clean with a
solvent as recommended by the sealant manufacturer. Allow excess
sealant to cure for 24 hour then remove by wire brushing or
sanding.
b.
Metal and Other Non-Porous Surfaces:
Remove excess sealant with a
solvent-moistened cloth.
-- End of Section --
SECTION 07920
Page 14
Previous Page
