This section shall be coordinated with other system
components specifications such as decking and sheet
metal flashing. This section shall also be
coordinated with the criteria of Unified Facilities
Criteria (UFC) 3-110-06, "Design: Roofing" as it
relates to the specific project and Service
Exceptions indicated therein.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z87.1
(2003) Practice for Occupational and
Educational Eye and Face Protection
ANSI Z88.2
(1992) Respiratory Protection
ASTM INTERNATIONAL (ASTM)
ASTM C 177
(2004) Steady-State Heat Flux Measurements
and Thermal Transmission Properties by
Means of the Guarded-Hot-Plate Apparatus
ASTM C 273
(2000e1) Shear Properties of Sandwich Core
Materials
ASTM C 518
(2004) Steady-State Thermal Transmission
Properties by Means of the Heat Flow Meter
Apparatus
ASTM D 1621
(2004a) Compressive Properties of Rigid
Cellular Plastics
ASTM D 1622
(2003) Apparent Density of Rigid Cellular
Plastics
ASTM D 1623
(2003) Tensile and Tensile Adhesion
Properties of Rigid Cellular Plastics
ASTM D 2126
(1999) Response of Rigid Cellular Plastics
to Thermal and Humid Aging
SECTION 07570
Page 5
Previous Page
