criteria contained in Unified Facilities Criteria
(UFC) 3-110-06 DESIGN: ROOFING as it relates to the
specific project and Service Exceptions indicated
therein.
Specified membrane attachment must be compatible
with the insulation specified. Membrane shall not
be adhered directly to polystyrene, perlite or
standard wood fiber, insulation. Facer on
polyisocyanurate insulations must be compatible with
the adhesive of a fully adhered membrane
application. Glass mat, moisture resistant gypsum
roof board can be used as an underlayment over
insulation for adhesive application of roof membrane
with approval of the membrane manufacturer. Top
insulation layer under ballasted roofing systems
shall be wood fiberboard, perlite, or glass mat,
moisture resistant gypsum roof board.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2002) Minimum Design Loads for Buildings
and Other Structures
ASTM INTERNATIONAL (ASTM)
ASTM D 448
(2003a) Sizes of Aggregate for Road and
Bridge Construction
ASTM D 4637
(2004) EPDM Sheet Used in Single-Ply Roof
Membrane
ASTM D 4811
(2004) Nonvulcanized (Uncured) Rubber
Sheet Used as Roof Flashing
ASTM D 6369
(1999) Design of Standard Flashing Details
for EPDM Roof Membranes
ASTM E 108
(2004) Fire Tests of Roof Coverings
SECTION 07530
Page 4
Previous Page
