components specifications such as framing, decking,
insulation and sheet metal flashing. This section
shall also be coordinated with the criteria of
Unified Facilities Criteria (UFC) 3-110-06, "Design:
Roofing" as it relates to the specific project and
Service Exceptions indicated therein. For Army
projects also refer to TI 809-29, "Structural
Considerations for Metal Roofing".
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2002) Minimum Design Loads for Buildings
and Other Structures
ASTM INTERNATIONAL (ASTM)
ASTM A 463/A 463M
(2002a) Steel Sheet, Aluminum-Coated, by
the Hot-Dip Process
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 755/A 755M
(2004a) Steel Sheet, Metallic Coated by
the Hot-Dip Process and Prepainted by the
Coil-Coating Process for Exterior Exposed
Building Products
ASTM A 792/A 792M
(2003) Steel Sheet, 55% Aluminum-Zinc
Alloy-Coated by the Hot-Dip Process
ASTM B 209
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate
ASTM B 209M
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate (Metric)
ASTM D 1308
(2002e1) Effect of Household Chemicals on
Clear and Pigmented Organic Finishes
ASTM D 1654
(1992; R 2000) Evaluation of Painted or
SECTION 07412
Page 4
Previous Page
