ASTM INTERNATIONAL (ASTM)
ASTM B 370
(2003) Copper Sheet and Strip for Building
Construction
ASTM C 1167
(2003) Clay Roof Tiles
ASTM C 1184
(2000ae1) Structural Silicone Sealants
ASTM D 146
(2004) Sampling and Testing
Bitumen-Saturated Felts and Woven Fabrics
for Roofing and Waterproofing
ASTM D 226
(1997a) Asphalt-Saturated Organic Felt
Used in Roofing and Waterproofing
ASTM D 2822
(1991; R 1997e1) Asphalt Roof Cement
ASTM D 412
(1998a; R 2002e1) Vulcanized Rubber and
Thermoplastic Elastomers - Tension
NATIONAL ROOFING CONTRACTORS ASSOCIATION (NRCA)
NRCA 0405
(2001; R 2003, 5th Ed) Roofing and
Waterproofing Manual
SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
(SMACNA)
SMACNA Arch. Manual
(2003, 6th Ed) Architectural Sheet Metal
Manual
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
SECTION 07320A
Page 4
Previous Page
