3. Detail at eave/rake corner of roof including
underlayment, drip edge, starter strip, shingle
exposure, shingle courses, and fastener placement.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM D 1970
(2001) Self-Adhering Polymer Modified
Bituminous Sheet Materials Used as Steep
Roofing Underlayment for Ice Dam Protection
ASTM D 224
(1989; R 1996) Smooth-Surfaced Asphalt
Roll Roofing (Organic Felt)
ASTM D 226
(1997a) Asphalt-Saturated Organic Felt
Used in Roofing and Waterproofing
ASTM D 249
(1989; R 1996) Asphalt Roll Roofing
(Organic Felt) Surfaced with Mineral
Granules
ASTM D 3018
(2003) Class A Asphalt Shingles Surfaced
With Mineral Granules
ASTM D 3462
(2004) Asphalt Shingles Made From Glass
Felt and Surfaced with Mineral Granules
ASTM D 41
(1994; R 2000e1) Asphalt Primer Used in
Roofing, Dampproofing, and Waterproofing
ASTM D 4586
(2000) Asphalt Roof Cement, Asbestos-Free
ASTM D 4869
(2004) Asphalt-Saturated Organic Felt
Underlayment Used in Steep Slope Roofing
NATIONAL ROOFING CONTRACTORS ASSOCIATION (NRCA)
NRCA Shingle Manual
1996 Asphalt Shingle Roofing Manual
SECTION 07311
Page 4
Previous Page
