**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-07161 (December 2003)
------------------------------
Preparing Activity: NAVFAC
Superseding
UFGS-07161N (September 1999)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 07161
METALLIC OXIDE WATERPROOFING
12/03
**************************************************************************
NOTE: This guide specification covers the
requirements for metallic oxide waterproofing for
application on interior face of concrete walls and
floors below grade, to provide a barrier impervious
to passage of water under hydrostatic pressure.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: Surfaces other than concrete may be
waterproofed by this method; consult manufacturer's
literature or approved applicators.
**************************************************************************
**************************************************************************
1. Metallic waterproofing is rigid and susceptible
to cracking during settlement or shrinkage of
surfaces to which it is applied. On interior
surfaces, it is readily accessible for repair by
cutting out defective areas and applying new
material.
2. Metallic waterproofing can be applied to
exterior wall surfaces; however, more flexible
materials may be more suitable and effective.
3.
Metallic waterproofing compound consists of
SECTION 07161
Page 3