Shop drawings showing all fabricated casework items in plan
view, elevations and cross-sections to accurately indicate
materials used, details of construction, dimensions, methods of
fastening and erection, and installation methods proposed. Shop
drawing casework items shall be clearly cross-referenced to
casework items located on the project drawings. Shop drawings
shall include a color schedule of all casework items to include
all countertop, exposed, and semi-exposed cabinet finishes to
include finish material manufacturer, pattern, and color.
SD-03 Product Data
Wood Materials
Wood Finishes
Finish Schedule
Descriptive data which provides narrative written verification
of all types of construction materials and finishes, methods of
construction, etc. not clearly illustrated on the submitted shop
drawings. Data shall provide written verification of conformance
with AWI Qual Stds for the quality indicated to include materials,
tolerances, and types of construction. Both the manufacturer of
materials and the fabricator shall submit available literature
which describes re-cycled product content, operations and
processes in place that support efficient use of natural
resources, energy efficiency, emissions of ozone depleting
chemicals, management of water and operational waste, indoor
environmental quality, and other production techniques supporting
sustainable design and products.
SD-04 Samples
Plastic Laminates
Two samples of each plastic laminate pattern and color. Samples
shall be a minimum of 120 by 170 mm 5 by 7 inches in size.
Cabinet Hardware
One sample of each cabinet hardware item specified to include
[hinges], [pulls], [drawer glides], and [_____].
SD-07 Certificates
Laminate Clad Casework
A quality control statement which illustrates compliance with
and understanding of AWI Qual Stds requirements, in general, and
the specific AWI Qual Stds requirements provided in this
specification. The quality control statement shall also certify a
minimum of ten years contractor's experience in laminate clad
casework fabrication and construction. The quality control
statement shall provide a list of a minimum of five successfully
completed projects of a similar scope, size, and complexity.
SECTION 06410A
Page 7
Previous Page
