ALLOWANCES FOR WEIGHT OF RIVET HEADS

___________________________________________________________________

ALLOWANCES FOR WEIGHT OF EQUAL-LEG FILLET WELDS

___________________________________________________________________

Leg of weld in

Pounds per foot

Inches

Length of weld

___________________________________________________________________

Note: For unequal-leg fillet welds the weight corresponding to the smaller

leg in the above listing shall be multiplied by the ratio of the longer leg

to the smaller leg.

___________________________________________________________________

ALLOWANCES FOR WEIGHT OF RIVET HEADS

___________________________________________________________________

Diameter in

Kilograms per

Millimeters

100 heads

___________________________________________________________________

13

1.8

16

3.2

19

5.4

22

8.2

25

12.0

29

16.0

32

22.0

35

27.0

38

37.0

___________________________________________________________________

ALLOWANCES FOR WEIGHT OF RIVET HEADS

___________________________________________________________________

Diameter in

Pounds per

Inches

100 heads

___________________________________________________________________

1/2

4

5/8

7

3/4

12

7/8

18

1

26

1-1/8

36

1-1/4

48

1-3/8

59

1-1/2

82

___________________________________________________________________

Note: Allowances for rivets are based on weight data given in AISC Manual

for high button type and shall apply to all types.

SECTION 05055A

Page 7