**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-05055A (September 2003)
----------------------------
Preparing Activity: USACE (CW)
Superseding
UFGS-05055A (December 1992)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 05055A
METALWORK FABRICATION, MACHINE WORK, MISCELLANEOUS PROVISIONS
09/03
**************************************************************************
NOTE: This guide specification covers the
requirements for general workmanship applicable to
the fabrication, assembly and testing of various
items of metalwork and machine work.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
SECTION 05055A
Page 3
Previous Page
