ACI INTERNATIONAL (ACI)
ACI 211.1
(1991; R 2002) Standard Practice for
Selecting Proportions for Normal,
Heavyweight, and Mass Concrete
ACI 211.2
(1998) Standard Practice for Selecting
Proportions for Structural Lightweight
Concrete
ACI 318/318R
(2002) Building Code Requirements for
Structural Concrete and Commentary
ACI 318M/318RM
(2002) Metric Building Code Requirements
for Structural Concrete and Commentary
ACI SP-66
(2004) ACI Detailing Manual
AMERICAN WELDING SOCIETY (AWS)
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
ASTM INTERNATIONAL (ASTM)
ASTM A 416/A 416M
(2002) Steel Strand, Uncoated Seven-Wire
for Prestressed Concrete
ASTM C 1017/C 1017M
(2003) Chemical Admixtures for Use in
Producing Flowing Concrete
ASTM C 494/C 494M
(2004) Chemical Admixtures for Concrete
PRECAST/PRESTRESSED CONCRETE INSTITUTE (PCI)
PCI MNL-116
(1999) Quality Control for Plants and
Production of Structural Precast Concrete
Products
PCI MNL-117
(1996) Quality Control for Plants and
Production of Architectural Precast
Concrete Products
PCI MNL-122
(1989) Architectural Precast Concrete
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
SECTION 03413A
Page 4
Previous Page
