"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-06 Test Reports
Mixture Proportions[; G][; G, [_____]]
The recommended mixture proportions, sources of materials, and
all test results shall be submitted for approval.
Aggregates
Supplier's test reports for aggregates showing the materials
meet the requirements of this specification.
Accelerator Compatibility[; G][; G, [_____]]
The Contractor shall establish the compatibility of the job
cement and the proposed accelerators.
Preconstruction Test Panels
Cores and sawed concrete beams shall be taken from test panels
and tested.
SD-07 Certificates
Portland Cement
Portland cement shall be certified for compliance with all
specification requirements.
Pozzolans
Fly ash and other pozzolans shall be certified for compliance
with all specification requirements.
Silica Fume
Silica fume shall be certified for compliance with all
specification requirements.
Accelerating Admixtures
Accelerating admixtures shall be certified for compliance with
all specification requirements.
Curing Materials
Curing materials shall be certified for compliance with all
specification requirements.
Steel Fiber Reinforcement
Fiber reinforcement shall be certified for compliance with all
specification requirements.
Qualifications[; G][; G, [_____]]
SECTION 03371
Page 7
Previous Page
