tile, terrazzo, or other floor finishes in order to
provide finished surfaces at the same elevations.
7. When exposed concrete surfaces are specified,
the locations in the finished structure shall be
indicated. If other than cast finish is required,
the type and location shall be indicated.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ACI INTERNATIONAL (ACI)
ACI 117
(1990; R 2002) Standard Tolerances for
Concrete Construction and Materials &
Commentary
ACI 211.1
(1991; R 2002) Standard Practice for
Selecting Proportions for Normal,
Heavyweight, and Mass Concrete
ACI 211.2
(1998) Standard Practice for Selecting
Proportions for Structural Lightweight
Concrete
ACI 213R
(2003) Guide for Structural Lightweight
Aggregate Concrete
ACI 301
(1999) Specifications for Structural
Concrete for Buildings
ACI 302.1R
(2004) Guide for Concrete Floor and Slab
Construction
ACI 304.2R
(1996) Placing Concrete by Pumping Methods
ACI 304R
(2000) Guide for Measuring, Mixing,
Transporting, and Placing Concrete
ACI 305R
(1999) Hot Weather Concreting
ACI 306.1
(1990; R 2002) Standard Specification for
Cold Weather Concreting
SECTION 03300N
Page 6
Previous Page
