SD-04 Samples
Surface Retarder
Sample of surface retarder material with manufacturer's
instructions for application in conjunction with air-water cutting.
SD-06 Test Reports
Testing and Inspection for Contractor Quality Control[; G][; G,
[_____]]
Certified copies of laboratory test reports, including mill
tests and all other test data, for portland cement, blended
cement, pozzolan, ground granulated blast furnace slag, silica
fume, aggregate, admixtures, and curing compound proposed for use
on this project.
SD-07 Certificates
Qualifications
Written documentation for Contractor Quality Control personnel.
1.5
QUALIFICATIONS
Contractor Quality Control personnel assigned to concrete construction
shall be American Concrete Institute (ACI) Certified Workmen in one of the
following grades or shall have written evidence of having completed similar
qualification programs:
Concrete Field Testing Technician, Grade I
Concrete Laboratory Testing Technician, Grade I or II
Concrete Construction Inspector, Level II
Concrete Transportation Construction Inspector or
Reinforced Concrete Special Inspector, Jointly certified by American
Concrete Institute (ACI), Building Official and Code Administrators
International (BOCA), International Conference of Building Officials (ICBO),
and Southern Building Code Congress International (SBCCI).
The foreman or lead journeyman of the flatwork finishing crew shall have
similar qualification for ACI Concrete Flatwork Technician/Finisher or
equal, with written documentation.
1.6
FIELD TEST PANELS
**************************************************************************
NOTE: Edit these paragraphs as appropriate.
Specify location for all field test panels. Add
requirements for mock-ups if applicable. Add
requirements for slab panels if exposed aggregate
slab finish is required or if superflat slab finish
is required.
**************************************************************************
Field test panels shall be constructed prior to beginning of work using the
materials and procedures proposed for use on the job, to demonstrate the
SECTION 03300A
Page 12
Previous Page
