should be in a separate section and should be
essentially in agreement with concrete construction
requirements in the American Association of State
Highway and Transportation Officials, "Standard
Specifications for Highway Bridges." Requirements
for deck slabs, curbs, gutters, and sidewalks
forming an integral part of the bridge should be
included in the section concerning concrete for
bridge construction.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ACI INTERNATIONAL (ACI)
ACI 117
(1990; R 2002) Standard Tolerances for
Concrete Construction and Materials &
Commentary
ACI 211.1
(1991; R 2002) Standard Practice for
Selecting Proportions for Normal,
Heavyweight, and Mass Concrete
ACI 211.2
(1998) Standard Practice for Selecting
Proportions for Structural Lightweight
Concrete
ACI 213R
(2003) Guide for Structural Lightweight
Aggregate Concrete
ACI 214.3R
(1988; R 1997) Simplified Version of the
Recommended Practice for Evaluation of
Strength Test Results of Concrete
ACI 301
(1999) Specifications for Structural
Concrete for Buildings
ACI 303R
(1991) Guide to Cast-In-Place
Architectural Concrete Practice
ACI 305R
(1999) Hot Weather Concreting
ACI 318/318R
(2002) Building Code Requirements for
Structural Concrete and Commentary
SECTION 03300A
Page 6
Previous Page
