project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 602
(1995a; R 2001) Agricultural Liming
Materials
ASTM D 4427
(1992; R 2002e1) Peat Samples by
Laboratory Testing
ASTM D 4972
(2001) pH of Soils
TURFGRASS PRODUCERS INTERNATIONAL (TPI)
TPI GSS
(1995) Guideline Specifications to
Turfgrass Sodding
U.S. DEPARTMENT OF AGRICULTURE (USDA)
DOA SSIR 42
(1996) Soil Survey Investigation Report
No. 42, Soil Survey Laboratory Methods
Manual, Version 3.0
1.2
DEFINITIONS
1.2.1
Stand of Turf
100 percent ground cover of the established species.
1.3
RELATED REQUIREMENTS
[Section 02300 EARTHWORK], [Section 02811 IRRIGATION SPRINKLER SYSTEMS],
[Section 02915 TRANSPLANTING EXTERIOR PLANTS], [Section 02921 SEEDING],
[Section 02923 SPRIGGING], [Section 02930 EXTERIOR PLANTS], and Section
02935 LANDSCAPE ESTABLISHMENT applies to this section for pesticide use and
plant establishment requirements, with additions and modifications herein.
1.4
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
SECTION 02922
Page 4
Previous Page
