Manufacturer's certificate of compliance.
1.3
QUALIFICATION OF WELDERS
Qualify welders in accordance with AWS D1.1/D1.1M using procedures,
materials, and equipment of the type required for the work.
1.4
DELIVERY, INSPECTION, STORAGE AND PROTECTION
Materials shall be delivered, handled, and stored in accordance with the
manufacturer's recommendations. Site furnishings shall be inspected upon
arrival at the job site for conformity to specifications and quality in
accordance with paragraph MATERIALS. Protect from corrosion, staining, and
other types of damage. Store items in designated area free from contact
with soil and weather. Remove and replace damaged items with new items.
1.5
GENERAL REQUIREMENTS
1.5.1
Fabrication Drawings
Submit fabrication drawings showing layout(s), connections to structural
system, and anchoring details as specified in AISC 303.
11.5.2
Installation Drawings
Submit templates, erection and installation drawings indicating thickness,
type, grade, class of metal, and dimensions. Show construction details,
reinforcement, anchorage, and installation.
1.5.3
Assembly Instruction Drawings
Submit assembly instruction drawings showing layout(s), connections,
bolting and anchoring details as per manufacturer's standards.
1.5.4
Primer Certificate
Submit a certificate from the manufacturer stating that the primer conforms
to requirements of SSPC Paint 25.
1.5.5
Powder Coatings Certificate
Submit a certificate from the manufacturer stating that the powder coat
conforms to ASTM D 3451.
PART 2
PRODUCTS
**************************************************************************
NOTE: Product selections should be based on
esthetic values, reliability and cost. Select
applicable materials as they may apply and delete
non-applicable items. Verify cross-references with
other sections related to materials.
**************************************************************************
2.1
MATERIALS
Materials shall be the standard products of a manufacturer regularly
engaged in the manufacture of such products. The materials provided shall
be of a type with proven satisfactory usage for at least 2 years.
SECTION 02870
Page 11
Previous Page
