compaction, of the aggregate base course, bituminous
base course, and porous friction surface course.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 117
(2004) Materials Finer Than 75 micrometer
(No. 200) Sieve in Mineral Aggregates by
Washing
ASTM C 127
(2004) Density, Relative Density (Specific
Gravity), and Absorption of Coarse
Aggregate
ASTM C 128
(2004) Density, Relative Density (Specific
Gravity), and Absorption of Fine Aggregate
ASTM C 131
(2003) Resistance to Degradation of
Small-Size Coarse Aggregate by Abrasion
and Impact in the Los Angeles Machine
ASTM C 136
(2004) Sieve Analysis of Fine and Coarse
Aggregates
ASTM C 174/C 174M
(1997) Measuring Thickness of Concrete
Elements Using Drilled Concrete Cores
ASTM C 183
(2002) Sampling and the Amount of Testing
of Hydraulic Cement
ASTM C 29/C 29M
(1997; R 2003) Bulk Density ("Unit
Weight") and Voids in Aggregate
ASTM C 88
(1999a) Soundness of Aggregates by Use of
Sodium Sulfate or Magnesium Sulfate
ASTM D 1250
(2004) Petroleum Measurement Tables
ASTM D 140
(2001) Sampling Bituminous Materials
ASTM D 1856
(1995a; R 2003) Recovery of Asphalt from
Solution by Abson Method
ASTM D 2170
(2001a) Kinematic Viscosity of Asphalts
SECTION 02747
Page 4
Previous Page
