**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-02531 (October 2004)
----------------------
Preparing Activity: USACE
Superseding
UFGS-02531 (July 2004)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 02531
SANITARY SEWERS
10/04
**************************************************************************
NOTE: This guide specification covers the
requirements for piping and appurtenant structures
for an exterior sanitary sewer system.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: The following is applicable to USACE project
designs.
All pipe materials specified will be retained except
under conditions where they would not be suitable;
see TM 5-814-1. Where it is determined that a pipe
material would be altogether unsuitable, every
mention of the unsuitable material and referenced
publications that pertain only to the unsuitable
material will be deleted. If a material would be
suitable in a part of the system and unsuitable in
other parts, the locations where the material may
and may not be used will be shown on the contract
drawings and stated in the contract specifications.
A study of the conditions will be made to determine
SECTION 02531
Page 4
Previous Page
