taken before, during, and after development.]
l.
Name and job title of individual developing well.
m.
Name and/or description of the disposal facility/area, for the
waters removed during development.
3.13.4
Geophysical Logs
**************************************************************************
NOTE: Delete this paragraph if not applicable for
the project.
**************************************************************************
Geophysical logs shall be prepared and completed for each well/test hole
installed. Information provided on the logs shall include, as a minimum,
the following:
a.
Project name.
b.
Test hole/well identification number.
c.
Location of test hole (coordinates, and state, and county name).
d.
Date test hole was drilled.
e.
Fluid level in test hole before logging.
f.
Fluid type and temperature.
g.
Fluid resistance in ohm-m.
h.
Casing type, diameter, and elevation (top and bottom).
i.
Cement type and elevation (top and bottom).
j.
Screen type, diameter, and elevation (top and bottom).
k.
Date and time test hole was logged.
l.
Reference elevation for all depth measurements.
m.
Operator's name.
n.
Equipment name and address.
o.
Logger type and number.
p.
Tool type.
q.
Detector type (Nuclear Log only).
r.
Source type (Nuclear Log only).
s.
Source size (Nuclear Log only).
t.
Source spacing (Nuclear Log only).
u.
Tool length, cable head to detector.
SECTION 02521
Page 39
Previous Page
