SUGGESTED REFERENCE TABLE FOR EXTRA-HIGH CAPACITY NETLESS STYLE FENDERS
FENDER
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
SIZE
6 x 10
72
1.5
120
1
14.1
693
522
1.5
6 x 12
72
1.5
144
1
14.1
847
623
1.5
6 x 14
72
1.5
168
1.125
14.1
1020
735
1.5
6 x 16
72
1.75
192
1.25
20.4
1186
842
1.5
6 x 18
72
2
216
1.375
31.7
1353
950
1.75
6 x 20
72
2
240
1.5
31.7
1540
1072
1.75
7
x
12
84
1.75
144
1.25
20.4
1155
740
1.5
7
x
14
84
1.75
168
1.25
20.4
1374
862
1.5
7
x
16
84
1.75
192
1.25
20.4
1585
980
1.5
7
x
18
84
2
216
1.375
31.7
1793
1096
1.75
7
x
20
84
2
240
1.5
31.7
2037
1232
1.75
7
x
22
84
2
264
1.75
31.7
2328
1392
1.75
8
x
14
96
2
168
1.25
31.7
1725
967
1.75
8
x
16
96
2
192
1.25
31.7
1994
1098
1.75
8
x
18
96
2
216
1.5
31.7
2339
1266
1.75
8
x
20
96
2
240
1.625
31.7
2645
1415
1.75
8
x
22
96
2.5
264
1.75
49.9
2953
1566
2
9
x
16
108
2
192
1.375
31.7
2518
1251
1.75
9
x
18
108
2
216
1.375
31.7
2864
1402
1.75
9
x
20
108
2.5
240
1.5
49.9
3236
1559
2
9
x
22
108
2.5
264
1.75
49.9
3662
1747
2
10 x 18
120
2
216
1.5
31.7
3518
1570
1.75
10 x 20
120
2.5
240
1.5
49.9
3943
1736
2
10 x 22
120
2.5
264
1.75
49.9
4453
1934
2
11 x 22
132
2.5
264
1.625
49.9
5271
2108
2
12 x 24
144
2.5
288
1.75
49.9
6815
2502
2
13 x 26
156
3
312
1.875
81.8
8663
2936
2.5
14 x 28
168
3
336
1.875
81.8
10820
3404
2.5
(A)
NOM DIAMETER (inches)
(B)
END SHACKLE (inches)
(C)
NOM LENGTH (inches EYE/EYE)
(D)
MIN. SKIN THICKNESS (inches)
(E)
FENDER SWL (TONS)
(F)
ENERGY ABSORPTION (FT-KIPS)
(AT OR BEFORE 60 PERCENT
COMPRESSION)
(G) REACTION FORCE (KIPS)
(AT PREDICTED ENERGY ATTAINMENT)
(H) NOMINAL CHAIN (Internal) SIZE, inches
**************************************************************************
Fenders shall have cylindrical mid-bodies with conical or hemispherical
shaped ends terminating in an end fitting on the cylinder's centerline at
each end. The diameter of the mid-body shall be [1829] [_____] mm [72]
[_____] inches minimum, and the length of the mid-body shall be [1981]
[_____] mm [78] [_____] inches minimum. If conical ends are provided, they
shall have an angle of 1.05 to 1.31 rad 60 to 75 degrees, when measured
SECTION 02396
Page 16
Previous Page
