2. Location of temporary utility connections, if
specified.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WATER WORKS ASSOCIATION(AWWA)
AWWA C511
(1997) Reduced-Pressure Principle Backflow
Prevention Assembly
FOUNDATION FOR CROSS-CONNECTION CONTROL AND HYDRAULIC RESEARCH
(FCCCHR)
FCCCHR List
(continuously updated) List of Approved
Backflow Prevention Assemblies
FCCCHR Manual
(9th Edition) Manual of Cross-Connection
Control
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 241
(2000) Safeguarding
Construction,Alteration, and Demolition
Operations
NFPA 70
(2005) National Electrical Code
U.S. FEDERAL HIGHWAY ADMINISTRATION (FHWA)
FHWA SA-89-006
(1988) Manual on Uniform Traffic Control
Devices for Streets and Highways
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
SECTION 01500N
Page 4