**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
Publications included in this guide specification
are applicable to chemical data quality control for
necessary to attain project Data Quality Objectives
(DQO). References for sampling and/or analytical
procedures must be for the most recent update of the
method. Include in the specification additional
references that are unique to the project such as
the Record of Decision (ROD), Federal, state and
local Applicable or Relevant and Appropriate
Requirements (ARAR), remedial and innovative
Use references in the CDQC section which are
compatible with references in other sections of the
specification. The designer should state in the
specification whether a reference is mandatory or
provided as guidance.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
U.S. ARMY CENTER FOR HEALTH PROMOTION AND PREVENTIVE MEDICINE
(USACHPPM)
USACHPPM Protocol
(1993) Sampling Protocol Building
Demolition Debris and Buildings Painted
with Lead-Based Paint
U.S. ARMY CORPS OF ENGINEERS (USACE)
EM 200-1-1
(1994) Validation of Analytical Chemistry
Laboratories
EM 200-1-3
(2001) Requirements for the Preparation of
Sampling and Analysis Plans
EM 200-1-6
Projects
ER 1110-1-263
(1998) Chemical Data Quality Management
for Hazardous, Toxic, Radioactive Waste
Remedial Activities
SECTION 01450A
Page 4