be made for the additional steel in laps which are authorized for the
convenience of the Contractor. No separate payment will be made for
accessories and payment shall be included in the contract unit price for
the items of work to which the accessories are incidental.
1.4.3.2
Measurement
The measured lengths of deformed steel bars for concrete reinforcement will
be converted to weights for the size of bars listed by the use of the
nominal weights per lineal meter foot specified in ASTM A 615/A 615M.
1.4.3.3
Unit of Measure
Unit of measure:
per kilogram pound in place.
1.4.4
Bituminous Base Course
**************************************************************************
NOTE: Paragraph UNIT PRICES of UFGS-02707
BITUMINOUS BASE COURSE was edited to develop this
example.
**************************************************************************
1.4.4.1
Payment
Payment will be made for
costs associated with bituminous base course,
which includes preparing
and reconditioning the underlying layer, and other
incidentals necessary to
complete the work required by Section 02707
BITUMINOUS BASE COURSE.
No payment will be made for defective areas until
corrected.
1.4.4.2
Measurement
Bituminous Base Course will be measured for payment based upon the number
of tons (metric) (2,000 pounds) of bituminous mixture used in the accepted
work. Bituminous mixture shall be weighed after mixing, and no deductions
will be made for the weight of bituminous material incorporated in the mix.
Quantities of paving mixtures called for in bid schedule are based on
aggregates having a specific gravity of 2.65 as determined according to
apparent specific gravity paragraphs in ASTM C 127 and ASTM C 128.
Correction in the tonnage of bituminous base course mixtures shall be made
to compensate for the difference in the tonnage of mixtures used in the
project, when specific gravities of aggregates used are more than 2.70 and
less than 2.60. The tonnage paid for shall be the number of tons used,
proportionately corrected for specific gravities using 2.65 as the base
correctional factor.
1.4.4.3
Unit of Measure
Unit of measure:
ton (metric) (2,000 pounds).
1.4.5
Bituminous Materials
**************************************************************************
NOTE: Paragraph UNIT PRICES of UFGS-02713
BITUMINOUS BASE COURSE was edited to develop this
example.
**************************************************************************
SECTION 01270A
Page 8
Previous Page
